High Angle Annular Dark Field Research Articles

Facet‐Junction Induced Strong Metal Support Interaction for Enhanced Alkaline Hydrogen Evolution Reaction

AbstractStrong metal‐support interaction (SMSI) plays a critical role in enhancing the catalytic performance of electrocatalysts. Currently, effective approaches to enhance the SMSI effect in supported electrocatalysts still need to be developed, and a comprehensive atomic‐level understanding of the underlying reaction mechanisms remains unclear. In this study, a novel facet‐junction strategy is proposed to enhance the SMSI between the loaded Ru atoms and the Co3O4 support. By modulating the ratio of exposed facet for (111)/(100) crystal plane in Co3O4, the hydrogen evolution reaction (HER) performance can be dramatically enhanced by 560% and can achieve a Pt‐like HER activity with the overpotential of 45 mV. Detailed analysis with atomic‐resolution integrated differential phase contrast (iDPC)‐scanning transmission electron microscopy (STEM), atomic‐resolution high angle annular dark field (HADDF)‐STEM, and electron energy loss spectroscopy (EELS) further proved that with proper (111)/(100) crystal plane ratio, the intensified charge distribution near the facet‐junction region would modify the electronic structure around the active sites. This work provides new insights to enhance the SMSI and will contribute to the rational design of highly efficient electrocatalysts for water splitting.

Evaluation and associated mechanism of mitigating Cr depletion by vanadium in modified 9Cr-1Mo steel: Experiment and phase-field modelling

The 9Cr-1Mo steel is extensively utilized in nuclear heat exchangers due to its exceptional corrosion resistance properties. The Chromium (Cr) element plays a pivotal role in enhancing the corrosion resistance. The Cr accumulates at grain boundaries (GBs) where defects and mismatches are located during long-term usage, leading to the depletion of Cr within the grain interior. This results in the Cr-rich carbide precipitates form along GBs, with a corresponding the depletion zone residing in the adjacent regions. In this study, we employed aberration-corrected high-resolution electron microscopy in high-angle annular dark field microscopy (HAADF) mode, equipped with energy dispersive spectroscopy (EDS), to analyse carbides formation along GBs and obtain elemental distribution information. Our investigation reveals that the Cr-rich carbide promotes the formation of chromium-depletion zone (CDZ) by consuming the surrounding Cr in the matrix, and the presence of vanadium-rich carbide inhibits the formation of (CDZ) from atomic scale.A phase-field modelling approach is employed to investigate the diffusive formation process in a polycrystalline system. Our modelling results are consistent with experimental observations. Cr preferentially diffuses towards grain boundaries (GBs) and accumulates, facilitating the formation of Cr-rich phases by consuming adjacent Cr in the surrounding region. The bilateral region of GBs serves as a source for supplying Cr to these newly formed phases while depleting Cr content, ultimately leading to the development of CDZ.By employing experimental techniques and phase-field method, this research provides valuable insights into the role of Cr, carbide precipitates, influence of vanadium, and CDZ formation.

Room Temperature-Built Gas Sensors from Green Carbon Derivative: A Comparative Study between Pristine SnO2 and GO-SnO2 Nanocomposite

Room temperature-built gas sensors were fabricated from graphene oxide (GO), pristine and doped SnO2 nanostructures. The as-synthesized green carbon derivative (GO) nanomaterials were prepared from waste plastic precursor using Modified Hummer’s methodology. Pristine SnO2 and GO-SnO2 nanocomposite were synthesized employing a wet synthesis technique known as co-precipitation. The as-prepared nanoparticles were investigated for structural crystallographic and morphological features using X-ray diffractometry (XRD) and Transmission electron microscopy (TEM) analytical techniques. High-angle annular dark field (HAADF) and elemental quantifications of the nanopowders were investigated with the Energy dispersive X-ray spectroscopy (EDX). Textural features were determined with the assistance of Brunauer-Emmett-Teller (BET) analyzer. Thermogravimetric analysis (TGA) was performed to ascertain the material stability and degradability of the synthetic materials. Functional group and bond structure analysis was conducted using Fourier-transform infrared (FTIR) spectroscopy. Gas sensor devices were tested for responses towards CH4, H2, LPG, and CO2 gases at 20 ppm concentrations of each. GO-SnO2 nanocomposite sensing device showed optimal detection response towards the respective analyte gases with values of 5.00, 5.08, 4.90 and 3.41 respectively. The prepared nanocomposite showed stability and selectivity towards the target gases in an order of magnitude of H2 > CH4 > LPG > CO2. The optimal gas sensor device’s dynamic gas sensing response was ascribed to the GO doping effect which relatively increased its surface area (46.48 m2g-1) and absorption sites.

Quantitative analysis of element substitution in mixed-vanadate LuxGd1-xVO4 single crystals at the atomic scale

In mixed crystals, two or more elements exhibit comparable properties and can be substituted freely. As a special type of “substitutional doping,” the properties of materials can be adjusted by altering the doping ratio of elements. Mixed-vanadate crystal LuxGd1-xVO4 is a promising laser host material with excellent chemical stability, mechanical property and thermal conductivity. The substitutional doping ratio of the two rare-earth elements determines the value of x. The thermal, optical, and laser properties of the material vary with x. However, the two types of atoms showing little difference in the same location in mixed crystals form substitutional solid solutions with alike atomic radii as well as electronic structures. Therefore, distinguishing comparable elements in mixed crystals at the atomic scale and quantitatively analyzing the doping ratio in mixed crystals are challenging. In this study, combining high angle annular dark field (HAADF) and electron energy loss spectroscopy (EELS), we accurately characterize the atomic structure of mixed-vanadate single crystal LuxGd1-xVO4 along the [111] orientation as well as the distribution of two rare-earth elements at the atomic scale. The ratio of Lu and Gd and the doping rules in the crystals are quantitatively analyzed. In addition, combined with the energy dispersive X-ray spectroscopy (EDS) results of the [100] crystal orientation, a uniform random distribution of Lu and Gd in the LuxGd1-xVO4 crystal is confirmed. This study provides a new means of understanding mixed-crystal structures and solves the problem of quantitative analysis of elemental doping in materials at the atomic scale, thus laying the foundation for exploring the relationships among composition, structure, and function in materials.

Phase coexistence induced surface roughness in V2O3/Ni magnetic heterostructures

We present an investigation of the microstructure changes in V2O3 as it goes through its inherent structural phase transition. Using V2O3 films with a well-defined crystal structure deposited by reactive magnetron sputtering on r-plane Al2O3 substrates, we study the phase coexistence region and its impact on the surface roughness of the films and the magnetic properties of overlying Ni magnetic layers in V2O3/Ni hybrid magnetic heterostructures. The simultaneous presence of two phases in V2O3 during its structural phase transition was identified with high resolution x-ray diffraction and led to an increase in surface roughness observed using x-ray reflectivity. The roughness reaches its maximum at the midpoint of the transition. In V2O3/Ni hybrid heterostructures, we find a concomitant increase in the coercivity of the magnetic layer correlated with the increased roughness of the V2O3 surface. The chemical homogeneity of the V2O3 is confirmed through transmission electron microscopy analysis. High-angle annular dark field imaging and electron energy loss spectroscopy reveal an atomically flat interface between Al2O3 and V2O3, as well as a sharp interface between V2O3 and Ni.

Modeling Si/SiGe quantum dot variability induced by interface disorder reconstructed from multiperspective microscopy

SiGe heteroepitaxial growth yields pristine host material for quantum dot qubits, but residual interface disorder can lead to qubit-to-qubit variability that might pose an obstacle to reliable SiGe-based quantum computing. By convolving data from scanning tunneling microscopy and high-angle annular dark field scanning transmission electron microscopy, we reconstruct 3D interfacial atomic structure and employ an atomistic multi-valley effective mass theory to quantify qubit spectral variability. The results indicate (1) appreciable valley splitting (VS) variability of ~50% owing to alloy disorder and (2) roughness-induced double-dot detuning bias energy variability of order 1–10 meV depending on well thickness. For measured intermixing, atomic steps have negligible influence on VS, and uncorrelated roughness causes spatially fluctuating energy biases in double-dot detunings potentially incorrectly attributed to charge disorder. Our approach yields atomic structure spanning orders of magnitude larger areas than post-growth microscopy or tomography alone, enabling more holistic predictions of disorder-induced qubit variability.

A P2/P3 Biphasic Layered Oxide Composite as a High-Energy and Long-Cycle-Life Cathode for Potassium-Ion Batteries.

Layered transition metal oxides are extensively considered as appealing cathode candidates for potassium-ion batteries (PIBs) due to their abundant raw materials and low cost, but their further implementations are limited by slow dynamics and impoverished structural stability. Herein, a layered composite having a P2 and P3 symbiotic structure is designed and synthesized to realize PIBs with large energy density and long-term cycling stability. The unique intergrowth of P2 and P3 phases in the obtained layered oxide is plainly characterized by X-ray diffraction refinement, high-angle annular dark field and annular bright field-scanning transmission electron microscopy at atomic resolution, and Fourier transformation images. The synergistic effect of the two phases of this layered P2/P3 composite is well demonstrated in K+ intercalation/extraction process. The as-prepared layered composite can present a large discharge capacity with the remarkable energy density of 321 Wh kg-1 and also manifest excellent capacity preservation after 600 cycles of K+ uptake/removal.

Atomic-Scale Imaging of Clay Mineral Nanosheets and Their Supramolecular Complexes through Electron Microscopy: A Supramolecular Chemist's Perspective.

Recent advancements in electron microscopy techniques have revolutionized the ability to directly visualize and understand the intricate world of supramolecular chemistry. This paper provides a concise overview of a study delving into the atomic-scale imaging of monolayer clay mineral nanosheets and their associated supramolecular complexes. The imaging is conducted by harnessing the power of aberration-corrected scanning transmission electron microscopy (STEM). Clay mineral nanosheets, with their anionic charge and ultrathin thickness (of 1 nm), serve as a stable Coulombic host material for cationic guest molecules through electrostatic interactions, facilitating exceptional stability and control during observation. By incorporation of heavy-metal atom markers coordinated within the target molecules, high-angle annular dark field STEM enables a clear visualization of these supramolecular complexes. This approach helps to overcome the limitations of graphene-based systems and expands the possibilities of atomic-scale imaging of nonperiodic molecular assemblies formed by weak supramolecular interactions. The fusion of electron microscopy techniques with the principles of supramolecular and material chemistry offers exciting opportunities for studying the structure, behavior, and properties of complex supramolecular systems. It sheds light on the intricate molecular architectures and design principles governing these systems. This study showcases the immense potential of electron microscopy in supramolecular chemistry and invites researchers from various disciplines to explore the transformative possibilities of atomic-scale imaging in the field.

Isolated Ni sites anchored on zeolites for direct synthesis of acetic acid from methane oxidative carbonylation

Direct conversion of methane to acetic acid with high activity and selectivity over non-noble metal-based catalysts under mild reaction conditions remains a grand challenge. Specifically, 1.2Ni-ZSM-5 with 88.9 % isolated Ni sites achieved a high acetic acid yield of 2920 μmol/gcat. and a remarkable selectivity up to 82.3 % from methane oxidative carbonylation. Combined with high angle annular dark field scanning transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy analyses, it was revealed that the isolated Ni species with Ni-O6 moieties anchored in the micropores of ZSM-5 were suggested to be the active sites. The isotopic labeling experiments and monitoring of reaction intermediates demonstrated that CH3COOH was formed via the direct coupling of methyl radicals and carbon monoxide molecules. This work suggests that the well-designed Ni sites can promote the transformation of CH4 to C2+ oxygenates instead of traditional C1 oxygenates as main products.

Vertically Stacked Amorphous Ir/Ru/Ir Oxide Nanosheets for Boosted Acidic Water Splitting.

Integrating multiple functional components into vertically stacked heterostructures offers a prospective approach to manipulating the physicochemical properties of materials. The synthesis of vertically stacked heterogeneous noble metal oxides remains a challenge. Herein, we report a surface segregation approach to create vertically stacked amorphous Ir/Ru/Ir oxide nanosheets (NSs). Cross-sectional high-angle annular darkfield scanning transmission electron microscopy images demonstrate a three-layer heterostructure in the amorphous Ir/Ru/Ir oxide NSs, with IrOx layers located on the upper and lower surfaces, and a layer of RuOx sandwiched between the two IrOx layers. The vertically stacked heterostructure is a result of the diffusion of Ir atoms from the amorphous IrRuOx solid solution to the surface. The obtained A-Ir/Ru/Ir oxide NSs display an ultralow overpotential of 191 mV at 10 mA cm-2 toward acid oxygen evolution reaction and demonstrate excellent performance in a proton exchange membrane water electrolyzer, which requires only 1.63 V to achieve 1 A cm-2 at 60 °C, with virtually no activity decay observed after a 1300 h test.

Isomorphic substitution behavior of Pt on synthetic vernadite (δ-MnO2):A model reaction to elucidate the mechanism of Pt enrichment in marine ferromanganese crust

Marine ferromanganese crusts are considered to be the potential Pt deposits, and recent studies report a strong association between Pt and vernadite in these crusts. However, there are still uncertainties regarding the molecular processes involved in the enrichment of Pt by vernadite. This study investigates the adsorption behavior and molecular-scale immobilization mechanisms of Pt at water/vernadite interfaces through a combination of batch adsorption and desorption experiments, X-ray absorption fine structure (XAFS) analyses, and atomic resolution chemical imaging. Our findings suggest that the Pt enrichment on vernadite is attributed to an isomorphic substitution of Mn by Pt. The extended X-ray absorption fine structure (EXAFS) analysis reveals that Pt undergoes ligand exchange reactions during the enrichment process, and provides a comprehensive explanation of how Pt penetrates into the vernadite structure starting from the surface. Scanning transmission electron microscopy high-angle annular dark field (STEM-HAADF) observations visually confirm the infiltration of Pt atoms into the crystal structure of vernadite. Additionally, we demonstrate that the Pt enrichment in vernadite is a multi-stage chemical process. X-ray absorption near edge structure (XANES) analysis shows that Pt is initially rapidly adsorbed onto the surface of vernadite and then slowly oxidized. Our study provides a detailed understanding of the molecular-scale mechanisms involved in the adsorption of Pt onto vernadite and its subsequent structural incorporation. This knowledge is valuable for gaining insights into the Pt enrichment in marine ferromanganese crusts.

Atomic Imaging of Multi-Dimensional Ruddlesden-Popper Interfaces in Lead-Halide Perovskites.

Ruddlesden-Popper (RP) interface with defined stacking structure will fundamentally influence the optoelectronic performances of lead-halide perovskite (LHP) materials and devices. However, it remains challenging to observe the atomic local structures in LHPs, especially for multi-dimensional RP interface hidden inside the nanocrystal. In this work, the advantages of two imaging modes in scanning transmission electron microscopy (STEM), including high-angle annular dark field (HAADF) and integrated differential phase contrast (iDPC) STEM, are successfully combined to study the bulk and local structures of inorganic and organic/inorganic hybrid LHP nanocrystals. Then, the multi-dimensional RP interfaces in these LHPs are atomically resolved with clear gap and blurred transition region, respectively. In particular, the complex interface by the RP stacking in 3D directions can be analyzed in 2D projected image. Finally, the phase transition, ion missing, and electronic structures related to this interface are investigated. These results provide real-space evidence for observing and analyzing atomic multi-dimensional RP interfaces, which may help to better understand the structure-property relation of LHPs, especially their complex local structures.

Scanning transmission electron microscopy and atom probe tomography analysis of non-stoichiometry long-period-stacking-ordered structures in Mg-Ni-Y/Sm alloys

The long-period-stacking-ordered (LPSO) structure affects the mechanical, corrosion and hydrolysis properties of Mg alloys. The current work employs high angle annular dark field - scanning transmission electron microscopy (HAADF-STEM) and atom probe tomography (APT) to investigate the structural and local chemical information of LPSO phases formed in Mg-Ni-Y/Sm ternary alloys after extended isothermal annealing. Depending on the alloying elements and their concentrations, Mg-Ni-Y/Sm develops a two-phase LPSO + α-Mg structure in which the LPSO phase contains defects, hybrid LPSO structure, and Mg insertions. HAADF-STEM and APT indicate non-stoichiometric LPSO with incomplete Ni6(Y/Sm)8 clusters. In addition, the APT quantitatively determines the local composition of LPSO and confirms the presence of Ni within the Mg bonding layers. These results provide insight into a better understanding of the structure and hydrolysis properties of LPSO-Mg alloys.

Defects in monolayer WS2 grown via sulfurization of WSe2

The conversion of chalcogen atoms into other types of chalcogen atoms in transition metal dichalcogenides exhibits significant advantages in tuning the bandgaps and constructing lateral heterojunctions. However, despite atomic defects at the atomic scale were inevitably formed during conversion process, the construction of dislocations remains difficult. Here, we conducted in-situ sulfurization to achieve structural transformation from monolayer WSe2 to WS2 successfully. We probe these transformations at atomic scale using high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and study structural defects of sulfurized-WS2 by strain and displacement fields. We discovered that high-quality WSe2 flakes were completely sulfurized while dislocations were successfully constructed, manifesting atomic surface roughness and structural disorders. Our work provides insights into designing and optimizing customized Transition metal dichalcogenides (TMDs) materials in controlled synthesis and defect engineering.

Different mechanisms of A-site and B-site high entropy effect on radiation tolerance of pyrochlores

The properties of high entropy pyrochlore have been studied extensively, but there is no consistent conclusion on its radiation tolerance. Besides, the mechanism of the high entropy effect on the radiation tolerance of pyrochlore is still unclear. In this work, combined with experiments and calculations of pyrochlores with similar cationic radius ratios, the A-site and B-site high entropy effects on structural evolution under irradiation are analyzed. In situ irradiation experiments were carried out on A-site high entropy pyrochlores such as (La0.2Nd0.2Sm0.2Gd0.2Er0.2)2Zr2O7, B-site Gd2(Ti1/3Sn1/3Zr1/3)2O7, and ternary pyrochlore Sm2Zr2O7 and Gd2Sn2O7 for comparison. The A-site high entropy pyrochlore can maintain a stable structure under high fluence irradiation like corresponding ternary pyrochlore, demonstrated by high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy dispersive spectroscopy (EDS) mapping and Raman spectrum. The additional irradiation experiments on A-site high entropy pyrochlores (La1/3Nd1/3Gd1/3)2Zr2O7 and (Nd1/3Sm1/3Gd1/3)2Zr2O7 also confirm the similarity under irradiation between A-site high entropy and ternary pyrochlores. However, the B-site high entropy pyrochlore Gd2(Ti1/3Sn1/3Zr1/3)2O7 becomes amorphous at exceptionally low irradiation fluences, indicating a significantly distinct radiation tolerance compared with the A-site high entropy. The difference between the A-site and B-site high entropy effect is analyzed from cationic lattice distortion, bond strength, and inner electron binding energy by first-principles calculations. The results reveal the role and mechanism of the high entropy effect in pyrochlores and lay a foundation for material design and future applications.

Thermochemical interactions between Ca2Sm8(SiO4)6O2 apatite and molten calcium–magnesium-aluminosilicate (CMAS)

Thermochemical interactions between Ca2Sm8(SiO4)6O2 (CSmS) apatite and molten calcium-magnesium-aluminosilicate (CMAS) glass having CaO/SiO2 mole ratio 0.37 have been evaluated. CSmS apatite-CMAS diffusion couples were annealed at 1200, 1300, and 1400 °C for 1–50 h. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high angle annular dark field imaging, selected area electron diffraction and energy dispersive x-ray spectroscopy were used to characterize the phases formed during the reaction. Formation of a distinct cyclosilicate [Ca3Sm2(Si3O9)2] layer was observed at apatite-CMAS interface in couples heat treated at 1200 °C but not at higher temperatures. The cyclosilicate layer nucleated at the apatite-CMAS reaction front, continued to grow into the residual melt and eventually detached from the apatite substrate. Residual CMAS melt became Ca-lean when cyclosilicate was present. Formation of MgCaSi2O6 diopside and dendrites of CaSiO3 wollastonite was also observed within the residual CMAS at 1200 °C. At 1300 and 1400 °C molten CMAS, due to its much lower viscosity, infiltrated the apatite substrate through open pores and along the grain boundaries. Ca2Sm8(SiO4)6O2 apatite thermal/environmental barrier coating has the potential to provide protection against CMAS attack up to about 1200 °C but not at higher temperatures.

Tailoring Young's modulus by controlling Al bond length and strength using positive Li and negative Mg

For decades, it has been widely accepted that adding Mg to Al alloys decays Young's modulus of Al alloys. However, the fundamental mechanism for Young's modulus reduction is still pending. In this study, we experimentally produce the Al–Li alloys and Al–Li–Mg alloys using centrifugal casting and trace Young's modulus as a function of the evolution of their precipitation structures. Atomic-resolution high-angle-annular-dark-field (HAADF) imaging in scanning transmission electron microscopy (STEM) indicates that the precipitate sizes of Al–Li and Al–Li–Mg alloys are essentially the same in the early and late stages of aging. While atomic resolution HAADF suggests that although the lattice constants of δ′-Al3Li in Al–Li and Al–Li–Mg alloys (0.404 nm) are consistent in the early aging stage, it changes to 0.422 nm in the Al–Li–Mg alloy at the end of peak aging, showing a significant expansion to the same level as α-Al (0.421 nm). The nanoindentation results confirm that Young's modulus decreases strongly from 89.04 to 76.39 GPa for Al–Li–Mg alloys due to the lattice relaxation. Combining atomic-resolution HAADF and first-principles calculations, it has been found that Mg atoms diffuse into Al3(Li, Mg) crystals by replacing Li in the L12 δ′-Al3Li and thus doping the crystal. Further, it has been found that Mg atoms expand the spacing between Al–Al and Al–Li pairs thereby lowering the energy between Al–Al and Al–Li bonds, which in turn stretches their potential energy curves reducing Young's modulus.

Atomic Imaging of the Pb Precipitation in Lead-Halide Perovskites.

The lead iodide (PbI2 ) in lead-halide perovskite (LHP) is both a positive additive for material properties and a site for the formation of device defects. Therefore, atomic-level detection of PbI2 and its derivedPbstructures are crucial for understanding the performance and stability of the LHP material. In this work, the atomic imaging of the LHP, PbI2 , and Pb lattices is achieved using low-dose integrated differential phase contrast (iDPC) scanning transmission electron microscopy (STEM). Combining it with the traditional high-angle annular dark field (HAADF)-STEM, the Pb precipitation in different LHPs (CsPbI3 , CsPbBr3, and FAPbI3 ) and under different conditions (light, air, and heat) can be investigated in real space. Then, the features of Pb precipitation (positions and sizes) are visually revealed under different conditions and the stabilities of different LHPs. Meanwhile, the pathway of Pb precipitation is directly imaged and confirmed by the iDPC-STEM during an in situ heating process, supporting the detailed mechanism of Pb precipitation. These results provide the visual evidence for analyzing atomic Pb precipitation in LHPs, which helps better understand the structure-property relation induced by Pb impurity.

Quantitative Scanning Transmission Electron Microscopy–High‐Angle‐Annular Dark‐Field Study of the Structure of Pseudo‐2D Sb2Te3 Films Grown by (Quasi) Van der Waals Epitaxy

Scanning transmission electron microscopy (STEM) techniques are used to improve the understanding of out‐of‐plane oriented Sb2Te3 thin films deposited by sputtering on SiO2 and Si substrates. Nanobeam precession electron diffraction, energy‐dispersive X‐ray spectroscopy, and high‐angle‐annular dark‐field imaging show that the presence of 1–2 atomic planes of Te on top of the substrate is a crucial factor for successful growth of such films, which can be achieved by optimizing cosputtering of Te and Sb2Te3 targets. The formation of an actual van der Waals (vdW) gap between the substrate and the first Sb2Te3 quintuple layer allows for vdW epitaxy. This gap is larger than those separating Te planes in the pseudo‐2D Sb2Te3 structure. HAADF image analysis provides detailed information on the atomic arrangement such as interplanar distances, vdW gaps, and Debye–Waller coefficients, all these with a few pm precision. For the anisotropic atomic displacements, a new methodology is introduced based on the statistical analysis of atomic column positions that provides information on the low‐frequency phonon modes. Ab initio calculations are used to support our results. Overall, this study provides quantitative STEM tools particularly well suited for nonperiodic pseudo‐2D materials, such as Sb2Te3/GeTe superlattices.

High piezoelectric performance in lead-free (K, Na)NbO3 ceramics under a low driving field

In this work, lead-free (K0.485Na0.485Li0.03)Nb0.8Ta0.2O3 composition was designed to control the orthorhombic-tetragonal phases boundary near the room temperature as confirmed by Rietveld analysis, high-angle annular dark field scanning transmission electron microscopy, and temperature dependent dielectric constant. A comparative study of the direct and indirect synthesis methods was carried out and their functional properties were optimized as a function of sintering temperature (Ts) and dwell time. Here, we achieved a large dynamic piezoelectric constant (d33*) of 510 pm/V under a very low electric field of 15–30 kV/cm. Moreover, an enhanced static piezoelectric constant (d33) of 335 pC/N was obtained with a high Curie temperature (TC) of 315 °C. The large d33 and d33* simultaneously with high TC in a single composition are promising results in lead-free polycrystalline ceramics. The strategic design of this work opens a new door for the possible development of novel functional materials for device applications.